72V241L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V241L10PFG Overview
FIFO memory chip can be found in the TQFP package.Memory IC's recommended mounted way is Surface Mount .An input voltage of 3.3V results in high efficiency.I found that it has 32 terminations in FIFO means.32 pin is used for operation.For its operation, 20mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is contained within FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.A total of 32 pins are present on the FIFO memory IC.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .
72V241L10PFG Features
FIFOs category
Frequency at most
72V241L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V241L10PFG FIFOs Memory applications.
- Alarm System
- High-speed disk
- Network switching/routing
- Character generators
- Data
- Tape controllers
- Code converters
- Rate buffers
- Portable Information Devices
- Buses
