72V241L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V241L10PFG8 Overview
The TQFP package contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.A total of 32 terminations are contained within FIFO means.Operation pins are 32 .In order to operate it, it requires 20mA volts of current.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.As a result, it contains a total of 32 pins.When the frequency is set to 100MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72V241L10PFG8 Features
FIFOs category
Frequency at most
72V241L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V241L10PFG8 FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- One assembly
- Wireless
- Emulators
- Multi-stage synchronizer
- General Data Collection Applications at Extreme High-Temperatures
- Product traceability
- Cameras
- Transistors
- Character generators
