72V241L15J
| Parameters | |
|---|---|
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
72V241L15J Overview
You will find FIFO memory chip in the LCC package.The recommended mounting method for this FIFO products is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.There are 32 pins on the operation pins.For its operation, 20mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.The FIFO memory IC has a total of 32 pins.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V241L15J Features
FIFOs category
Frequency at most
72V241L15J Applications
There are a lot of Integrated Device Technology (IDT) 72V241L15J FIFOs Memory applications.
- PC peripheral
- Data-acquisition systems
- Communications
- General Data Collection Applications at Low-Temperatures
- One assembly
- Networking
- Industrial Systems
- Multi-stage synchronizer
- Communications Systems
- IP Camera Buffer
