72V241L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V241L15PFI Overview
FIFO memory chip is included in the TQFP package.Mounting it in Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .I found that it has 32 terminations in FIFO means.32 pins are the operation pins.The maximum current required for its operation is 20mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.There are a total of 32 pins on this board.It is capable of maintaining good accuracy with a frequency of 66.7MHz .There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V241L15PFI Features
FIFOs category
Frequency at most
72V241L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V241L15PFI FIFOs Memory applications.
- Game Consoles
- Product traceability
- Test Equipment
- Extended product-change notification
- Controlled baseline
- Computers
- SPI Bus Flash Memory Device
- Queues for communication systems
- Firmware loaders
- Look-up Tables
