72V241L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 4KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V241L20PF8 Overview
You can find FIFO memory chip in the LQFP package.The package comes in a case of Tape & Reel (TR) .The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .32 terminations are contained in FIFO means.In the case of the operation pins, they are 32 pins.The maximum current required for its operation is 20mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.This FIFO memory IC is equipped with 32 pins in total.During normal operation, the FIFO memory's maximum value is 50MHz .
72V241L20PF8 Features
FIFOs category
Frequency at most
72V241L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V241L20PF8 FIFOs Memory applications.
- Tape controllers
- SPI Bus Flash Memory Device
- SPI Bus Flash Memory Devices
- Signal processing
- Application that requires re-writable nonvolatile parameter memory
- Down-Hole Energy Drilling
- A/D output buffers
- Firmware loaders
- SPD for DDR3 Memory Modules
- Smart Meter
