72V243L6BC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V243L6BC Overview
This FIFO memory chip is packaged as a Bulk .Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 100 terminations can be found in FIFO means.FIFO design has 100 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.There are a total of 100 pins on this FIFO memory IC.It maintains good accuracy at a 166MHz frequency.A FIFO memory's maximum value of 166MHz can be used for regular operation.
72V243L6BC Features
FIFOs category
Frequency at most
72V243L6BC Applications
There are a lot of Integrated Device Technology (IDT) 72V243L6BC FIFOs Memory applications.
- Video
- Fabrication Site
- Game Consoles
- IP Radio
- Data communications
- MP3 Interface for Automobile
- Network bridges
- A/D output buffers
- Multimedia
- Look-up Tables
