72V243L7-5BC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V243L7-5BC Overview
There is a case Bulk in which it is packaged.It is pointing in the direction of Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 100 terminations can be found in FIFO means.FIFO design has 100 operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.This gadget is self-contained in?FIFOs .The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.It consists of a total of 100 pins.When the frequency is set to 133.3MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 133.3MHz .
72V243L7-5BC Features
FIFOs category
Frequency at most
72V243L7-5BC Applications
There are a lot of Integrated Device Technology (IDT) 72V243L7-5BC FIFOs Memory applications.
- Programmable Logic Controller
- PC peripheral
- Seismic Data Collection at Extreme Temperatures
- Network switching/routing
- Test Equipment
- Wireless
- Communications Systems
- One assembly
- Routers
- Communications
