72V243L7-5PFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO BE CONFIGURED AS 4K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 30mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 2KX18 |
| Standby Current-Max | 0.015A |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V243L7-5PFGI Overview
TQFP is the package in which FIFO memory chip is contained.There's a Bulk on the package.Mounting it in the Surface Mount way is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO means contains 80 terminations.There are 80 pins for operation.FIFO design requires a maximum current of 30mA to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .Low supply voltages, such as 3.15V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.45V volts.Approximately 80 pins are attached to it.The memory logic's maximum value is 133.3MHz for regular operation.The gadget can also generate a value of IT CAN ALSO BE CONFIGURED AS 4K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE .
72V243L7-5PFGI Features
FIFOs category
Frequency at most
72V243L7-5PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V243L7-5PFGI FIFOs Memory applications.
- Digital buffering
- Event Recorder
- Magnetic memories
- Character generators
- Fabrication Site
- Computers
- Product traceability
- Extended product life cycle
- Laser Receiver System
- SPI Bus Flash Memory Devices
