72V245L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V245L10PFG8 Overview
FIFO memory chip can be found in the TQFP package.Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 64 terminations.These are the 64 pins for operation.In order to operate FIFO design, a maximum current of 30mA is required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.The memory logic's maximum supply voltage is 3.6V volts.There are a total of 64 pins on this FIFO memory IC.It maintains good accuracy at a 100MHz frequency.Normally, the FIFO memory's maximum value is 100MHz .Additionally, EASILY EXPANDABLE IN DEPTH AND WIDTH can be generated with this FIFO memory.
72V245L10PFG8 Features
FIFOs category
Frequency at most
72V245L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V245L10PFG8 FIFOs Memory applications.
- Industrial Systems
- Consumer Systems
- SPD for DDR3 Memory Modules
- Temporary storage elements
- Video
- TVs
- Desktop Computers
- MP3 Interface for Automobile
- HDD
- Event Recorder
