72V245L10TF
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
72V245L10TF Overview
You can find FIFO memory chip in package LQFP .Surface Mount is recommended as the mounting method.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.Operation pins are 64 .The maximum current required for its operation is 30mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.The memory logic's maximum supply voltage is 3.6V volts.There are a total of 64 pins on this FIFO memory IC.With a frequency of 100MHz , it exhibits good accuracy.For regular operation, the memory logic's maximum value is 100MHz .This gadget can also be used to generate EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V245L10TF Features
FIFOs category
Frequency at most
72V245L10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V245L10TF FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Buses
- Data communications
- Battery Charger
- Laser Receiver System
- HDD
- Analog-to-digital converters
- IP Radio
- Consumer Systems
- Network bridges
