72V245L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V245L15PF8 Overview
TQFP is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 3.3V allows for high efficiency.FIFO means contains 64 terminations.64 pins are the operation pins.For its operation, 30mA is the maximum current required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.This gadget is self-contained in?FIFOs .In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.Approximately 64 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 66.7MHz .There is 66.7MHz FIFO memory IC's maximum value for regular operation.The gadget can also generate a value of EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V245L15PF8 Features
FIFOs category
Frequency at most
72V245L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V245L15PF8 FIFOs Memory applications.
- Microprogramming
- Thermal Management for DDR3 Memory Modules
- Switches
- General Data Collection Applications at Low-Temperatures
- Computers
- MP3 Interface for Automobile
- Buses
- Battery Charger
- SPI Bus Flash Memory Devices
- Programmable Logic Controller
