72V245L15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 9kB |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 18b |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V245L15TFI Overview
The TQFP package contains FIFO memory chip.There is a 9kB MB memory on the FIFO chips, which can be used to store both applications and data.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.A total of 64 terminations can be found in FIFO means.These are the 64 pins for operation.FIFO design requires a maximum current of 30mA to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.The gadget in FIFOs is self-contained.This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.As a result, it contains a total of 64 pins.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .With the use of 1 circuits, FIFO memory chip provides enhanced flexibility.
72V245L15TFI Features
9kB memory size
FIFOs category
Frequency at most
72V245L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V245L15TFI FIFOs Memory applications.
- Analog-to-digital converters
- Application that requires re-writable nonvolatile parameter memory
- Cardiac Monitoring Device
- Networking
- High-speed disk
- General Data Collection Applications at Extreme High-Temperatures
- One assembly
- Signal processing
- Emulators
- Character generators
