72V245L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V245L20PF8 Overview
You can find FIFO memory chip in package TQFP .Memory IC's recommended mounted way is Surface Mount .An input voltage of 3.3V results in high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are used for operation.There is a maximum current requirement of 30mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.A total of 64 pins are present on the FIFO memory IC.When the frequency is set to 50MHz it can maintain good accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.The gadget can also generate a value of EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V245L20PF8 Features
FIFOs category
Frequency at most
72V245L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V245L20PF8 FIFOs Memory applications.
- Optical memories
- HDD
- SPD for DDR3 Memory Modules
- Cameras
- Programmable Logic Controller
- Wireless
- Disk Controllers
- Application that requires re-writable nonvolatile parameter memory
- One assembly
- Signal processing
