72V251L10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V251L10J Overview
You can find FIFO memory chip in package PLCC .A Surface Mount mounting method is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pins are the operation pins.There is a maximum current requirement of 20mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.An operating temperature of 70°C °C is necessary for stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.Approximately 32 pins are attached to it.When the frequency is set to 100MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72V251L10J Features
FIFOs category
Frequency at most
72V251L10J Applications
There are a lot of Integrated Device Technology (IDT) 72V251L10J FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Desktop Computers
- TVs
- Consumer
- Alarm System
- Medical Monitoring Device
- Character generators
- Video
- Cardiac Monitoring Device
- Address mapping
