72V251L10JG
| Parameters | |
|---|---|
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
72V251L10JG Overview
You can find FIFO memory chip in package PLCC .Mounting it in the Surface Mount way is recommended.High efficiency is possible with a supply voltage of 3.3V .FIFO means contains 32 terminations.FIFO design has 32 operation pins.In order to operate FIFO design, a maximum current of 20mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.In some cases, FIFO operates at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 32 pins.A frequency of 100MHz is capable of maintaining good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.
72V251L10JG Features
FIFOs category
Frequency at most
72V251L10JG Applications
There are a lot of Integrated Device Technology (IDT) 72V251L10JG FIFOs Memory applications.
- Game Controller
- HDD
- Transistors
- SPI Bus Flash Memory Device
- Character generators
- Smart Meter
- Telecommunication
- Event Recorder
- Computer Systems
- Multimedia
