72V251L10JG8
| Parameters | |
|---|---|
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
72V251L10JG8 Overview
You can find FIFO memory chip in package PLCC .Mounting it in Surface Mount is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 32 terminations can be found in FIFO means.The operation pins are 32 pins.FIFO design requires 20mA amps of current to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Its maximum operating temperature of 70°C °C ensures stable operation.In FIFOs , there is a self-contained gadget.This part has a memory type of OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.6V volts.There are a total of 32 pins on this board.In the presence of a 100MHz frequency, it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .
72V251L10JG8 Features
FIFOs category
Frequency at most
72V251L10JG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V251L10JG8 FIFOs Memory applications.
- Code converters
- IP Radio
- Routers
- Test site
- Video time base correction
- Application that requires re-writable nonvolatile parameter memory
- Magnetic memories
- GPS Offender Tracking
- Temporary storage elements
- Transistors
