72V251L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V251L10PFG Overview
This package is included in TQFP .Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.The number of terminations in FIFO means is 32 .32 pins are used for operation.Its maximum operating current is 20mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.The FIFO memory IC is equipped with a total of 32 pins.When the frequency is set to 100MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72V251L10PFG Features
FIFOs category
Frequency at most
72V251L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V251L10PFG FIFOs Memory applications.
- Alarm System
- Portable Information Devices
- Cardiac Monitoring Device
- Tape controllers
- Video time base correction
- Code converters
- Communications Systems
- General Data Collection Applications at Low-Temperatures
- A/D output buffers
- Computer networks
