72V251L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V251L10PFG8 Overview
TQFP is the package in which FIFO memory chip is contained.It is recommended that memory IC be mounted in the Surface Mount direction.Supply voltages of 3.3V are capable of achieving high efficiency.As a result of this, FIFO means contains 32 terminations.The operation pins are 32 pins.The maximum current required for its operation is 20mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.This FIFO memory IC is equipped with 32 pins in total.In the presence of a 100MHz frequency, it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72V251L10PFG8 Features
FIFOs category
Frequency at most
72V251L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V251L10PFG8 FIFOs Memory applications.
- Test site
- IP Radio
- MP3 Interface for Automobile
- Cameras
- One assembly
- SPD for DDR3 Memory Modules
- A/D output buffers
- Smart Meter
- IP Camera Buffer
- Consumer
