72V251L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V251L15J8 Overview
FIFO memory chip is contained in the PLCC package.The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .The number of terminations in FIFO means is 32 .32 pins are used for operation.FIFO requires a minimum of 20mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , this gadget is self-contained.The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.This FIFO memory IC is equipped with 32 pins in total.When the frequency is set to 66.7MHz , the system can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V251L15J8 Features
FIFOs category
Frequency at most
72V251L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V251L15J8 FIFOs Memory applications.
- Extended product-change notification
- Game Controller
- Game Consoles
- IP Radio
- Network bridges
- Buses
- HDD
- Video time base correction
- Disk Controllers
- Cameras
