72V251L15JGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V251L15JGI8 Overview
PLCC is a package that contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.The number of terminations in FIFO means is 32 .Operation pins are 32 .In order to operate FIFO design, a maximum current of 20mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.85°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.The FIFO memory IC is equipped with a total of 32 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.
72V251L15JGI8 Features
FIFOs category
Frequency at most
72V251L15JGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V251L15JGI8 FIFOs Memory applications.
- Computer Systems
- Wireless
- General Data Collection Applications at Extreme High-Temperatures
- Signal processing
- Computer networks
- Emulators
- High-speed disk
- Transistors
- Tape controllers
- Notebook
