72V251L15JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V251L15JI Overview
The PLCC package contains FIFO memory chip.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 32 terminations.32 pins are used for operation.There is a maximum current requirement of 20mA for its operation.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.It operates at -40°C degrees Celsius to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum voltage of 3.6V volts can be applied to FIFO memory.Approximately 32 pins are attached to it.When the frequency is set to 66.7MHz , the system can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .
72V251L15JI Features
FIFOs category
Frequency at most
72V251L15JI Applications
There are a lot of Integrated Device Technology (IDT) 72V251L15JI FIFOs Memory applications.
- Emulators
- Notebook
- Address mapping
- General Data Collection Applications at Extreme High-Temperatures
- Measurement Equipment
- Industrial Systems
- Queues for communication systems
- Wireless
- Digital buffering
- IP Camera Buffer
