72V251L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 9b |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V251L15PF Overview
FIFO memory chip is contained in the TQFP package.It is pointing in the direction of Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 20mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.
72V251L15PF Features
FIFOs category
Frequency at most
72V251L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V251L15PF FIFOs Memory applications.
- Computer networks
- Application that requires re-writable nonvolatile parameter memory
- Video time base correction
- Queues for communication systems
- High-speed graphics pixel buffer
- SPI Bus Flash Memory Devices
- Emulators
- Desktop Computers
- SPD for DDR3 Memory Modules
- Product traceability
