72V251L15PFI
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
72V251L15PFI Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 32 terminations.FIFO design has 32 operation pins.In order to operate FIFO design, a maximum current of 20mA is required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 32 pins in total.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V251L15PFI Features
FIFOs category
Frequency at most
72V251L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V251L15PFI FIFOs Memory applications.
- Address mapping
- Multimedia
- Game Consoles
- Signal processing
- Telecommunication
- Thermal Management for DDR3 Memory Modules
- Video Processing
- A/D output buffers
- Network bridges
- Seismic Data Collection at Extreme Temperatures
