72V251L15PFI8
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
72V251L15PFI8 Overview
FIFO memory chip can be found in the LQFP package.It comes in a Tape & Reel (TR) package.A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.The maximum current required for its operation is 20mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.It has a total of 32 pins on it.The memory logic's maximum value is 66.7MHz for regular operation.
72V251L15PFI8 Features
FIFOs category
Frequency at most
72V251L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V251L15PFI8 FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- HDD
- Extended product life cycle
- GPS Offender Tracking
- Data communications
- Switches
- Controlled baseline
- IP Radio
- Portable Information Devices
- Computer networks
