72V251L20J
| Parameters | |
|---|---|
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
72V251L20J Overview
You can find FIFO memory chip in the LCC package.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 32 terminations.FIFO design has 32 operation pins.The maximum current required for its operation is 20mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.This FIFO memory IC is equipped with 32 pins in total.There is 50MHz FIFO memory IC's maximum value for regular operation.
72V251L20J Features
FIFOs category
Frequency at most
72V251L20J Applications
There are a lot of Integrated Device Technology (IDT) 72V251L20J FIFOs Memory applications.
- Routers
- Cameras
- Network bridges
- Network switching/routing
- Application that requires re-writable nonvolatile parameter memory
- Telecommunication
- General Data Collection Applications at Extreme High-Temperatures
- Game Consoles
- Signal processing
- Seismic Data Collection at Extreme Temperatures
