72V251L20J8
| Parameters | |
|---|---|
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
72V251L20J8 Overview
FIFO memory chip is contained in the PLCC package.A Surface Mount mounting method is recommended.High efficiency is possible with a supply voltage of 3.3V .In FIFO means, there are 32 terminations.There are 32 pins for operation.In order for FIFO design to operate, a maximum current of 20mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.This FIFO memory IC is equipped with 32 pins in total.With a frequency of 50MHz , it maintains good accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .
72V251L20J8 Features
FIFOs category
Frequency at most
72V251L20J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V251L20J8 FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Data
- Cardiac Monitoring Device
- Look-up Tables
- Portable Information Devices
- Computer Systems
- Test Equipment
- Switches
- PC peripheral
- Application that requires re-writable nonvolatile parameter memory
