72V251L20PF
| Parameters | |
|---|---|
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
72V251L20PF Overview
The TQFP package contains FIFO memory chip.Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.In FIFO means, there are 32 terminations.There are 32 pins on the operation pins.In order to operate FIFO design, a maximum current of 20mA is required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.There are a total of 32 pins on this FIFO memory IC.In the presence of a 50MHz frequency, it can maintain good accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.
72V251L20PF Features
FIFOs category
Frequency at most
72V251L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V251L20PF FIFOs Memory applications.
- Code converters
- Extended product life cycle
- Seismic Data Collection at Extreme Temperatures
- Controlled baseline
- GPS Offender Tracking
- Switches
- General Data Collection Applications at Extreme High-Temperatures
- SPI Bus Flash Memory Device
- A/D output buffers
- Wireless
