72V251L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V251L20PF8 Overview
You can find FIFO memory chip in the LQFP package.It's packaged in the shape of a Tape & Reel .Surface Mount is recommended as the mounting method.High efficiency is possible with a supply voltage of 3.3V .I found that it has 32 terminations in FIFO means.In the case of the operation pins, they are 32 pins.FIFO design requires 20mA amps of current to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.As a result, it contains a total of 32 pins.During normal operation, the FIFO memory's maximum value is 50MHz .
72V251L20PF8 Features
FIFOs category
Frequency at most
72V251L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V251L20PF8 FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Computer Systems
- High-speed graphics pixel buffer
- Fabrication Site
- Portable Information Devices
- IP Camera Buffer
- Video
- SPI Bus Flash Memory Devices
- MP3 Interface for Automobile
- Analog-to-digital converters
