72V253L6BC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V253L6BC Overview
Bulk case is used for packaging.It is pointing in the direction of Surface Mount .A supply voltage of 3.3V allows for high efficiency.FIFO means contains 100 terminations.The operation pins are 100 pins.There is a maximum current requirement of 35mA for its operation.A 3.3V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.There are a total of 100 pins on this FIFO memory IC.A frequency of 166MHz is sufficient to maintain good accuracy.166MHz is the FIFO memory IC's maximum value for regular operation.
72V253L6BC Features
FIFOs category
Frequency at most
72V253L6BC Applications
There are a lot of Integrated Device Technology (IDT) 72V253L6BC FIFOs Memory applications.
- Character generators
- Queues for communication systems
- One assembly
- Consumer Systems
- Tape controllers
- SPI Bus Flash Memory Device
- Network bridges
- Temporary storage elements
- Communications
- Video time base correction
