72V253L6PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V253L6PFG Overview
TQFP is a package that contains FIFO memory chip.It comes in a Bulk package.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 80 .80 pin is used for operation.In order to operate it, it requires 35mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.The FIFO memory chip may be operated at very low supply voltages, such as3.15V volts.A maximum voltage of 3.45V volts can be applied to FIFO memory.Currently, it has 80 pins.In the presence of a 166MHz frequency, it can maintain good accuracy.Normally, the FIFO memory's maximum value is 166MHz .
72V253L6PFG Features
FIFOs category
Frequency at most
72V253L6PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V253L6PFG FIFOs Memory applications.
- Portable Information Devices
- Computers
- HDD
- Data
- Firmware loaders
- General Data Collection Applications at Extreme High-Temperatures
- Smart Meter
- Multimedia
- Telecommunication
- High-speed disk
