72V253L6PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V253L6PFG8 Overview
You can find FIFO memory chip in the TQFP package.Surface Mount is recommended as the mounting method.Supply voltages of 3.3V are capable of achieving high efficiency.The number of terminations in FIFO means is 80 .There are 80 pins on the operation pins.FIFO requires a minimum of 35mA current to operate.A 3.3V supply voltage will ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.A maximum voltage of 3.45V volts can be applied to FIFO memory.It has a total of 80 pins on it.With a frequency of 166MHz , it maintains good accuracy.It is recommended that the FIFO memory's maximum value be set to 166MHz .
72V253L6PFG8 Features
FIFOs category
Frequency at most
72V253L6PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V253L6PFG8 FIFOs Memory applications.
- Cardiac Monitoring Device
- Video Processing
- Game Consoles
- Switches
- MP3 Interface for Automobile
- Microprogramming
- Application that requires re-writable nonvolatile parameter memory
- Data-acquisition systems
- Video
- SPI Bus Flash Memory Devices
