72V253L7-5BC
| Parameters | |
|---|---|
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Data Bus Width | 18b |
| Organization | 4KX18 |
| Standby Current-Max | 0.015A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO BE CONFIGURED AS 8K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 9kB |
72V253L7-5BC Overview
100 is a package that contains FIFO memory chip.There's a Bulk on the package.It is possible to store data and applications on the FIFO chips as they have 9kB in their memory.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.In FIFO means, there are 100 terminations.The maximum current required for its operation is 35mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.An input voltage of 3.45V V is the maximum that FIFO memory can handle.There are a total of 100 pins on this board.A FIFO memory's maximum value of 133.3MHz can be used for regular operation.Additionally, this FIFO memory can be used to generate IT CAN ALSO BE CONFIGURED AS 8K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE .
72V253L7-5BC Features
9kB memory size
FIFOs category
Frequency at most
72V253L7-5BC Applications
There are a lot of Integrated Device Technology (IDT) 72V253L7-5BC FIFOs Memory applications.
- PC peripheral
- Portable Information Devices
- Video time base correction
- Test site
- Microprogramming
- MP3 Interface for Automobile
- Consumer Systems
- Fabrication Site
- Product traceability
- Laser Receiver System
