72V253L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V253L7-5PF Overview
FIFO memory chip is included in the TQFP package.It comes in a Bulk package.Surface Mount is recommended as the mounting method.An input voltage of 3.3V results in high efficiency.A total of 80 terminations are contained within FIFO means.The operation pins are 80 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.It has a OTHER FIFO memory type IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.As a result, it contains a total of 80 pins.Despite a frequency of 133.3MHz , it is capable of maintaining good accuracy.Normally, the FIFO memory's maximum value is 133.3MHz .
72V253L7-5PF Features
FIFOs category
Frequency at most
72V253L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V253L7-5PF FIFOs Memory applications.
- Video time base correction
- Consumer Systems
- Test Equipment
- Desktop Computers
- Data-acquisition systems
- GPS Offender Tracking
- High-speed graphics pixel buffer
- Computer networks
- Network bridges
- Data communications
