72V253L7-5PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Weight | 513.60831mg |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V253L7-5PF8 Overview
You can find FIFO memory chip in the TQFP package.Mounting it Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO means contains a total of 80 terminations.These are the 80 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.The FIFO memory IC is equipped with a total of 80 pins.A frequency of 133.3MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 133.3MHz .
72V253L7-5PF8 Features
FIFOs category
Frequency at most
72V253L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V253L7-5PF8 FIFOs Memory applications.
- Address mapping
- Signal processing
- Tape controllers
- Computer networks
- Magnetic memories
- Video
- Computer Systems
- Portable Information Devices
- SPI Bus Flash Memory Devices
- Firmware loaders
