banner_page

72V253L7-5PFI

80 Terminations3.3V 80 Pin FIFO memory IC5 ns Min 3.15V VMax 3.45V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72V253L7-5PFI
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 576
  • Description: 80 Terminations3.3V 80 Pin FIFO memory IC5 ns Min 3.15V VMax 3.45V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 80
Packaging Bulk
Published 2009
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 80
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 133.3MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 80
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Element Configuration Dual
Max Supply Current 35mA
Frequency (Max) 133.3MHz
Access Time 5 ns
Organization 4KX18
Density 72 kb
Standby Current-Max 0.015A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
Retransmit Capability Yes
Output Enable YES
Height Seated (Max) 1.6mm
Length 14mm
Width 14mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

72V253L7-5PFI Overview


FIFO memory chip is contained in the TQFP package.In the shape of a Bulk , it's packaged.Mounting it Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.FIFO means contains a total of 80 terminations.FIFO design has 80 operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.A maximum voltage of 3.45V volts can be applied to FIFO memory.There are a total of 80 pins on this board.When the frequency is set to 133.3MHz , the system can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 133.3MHz .

72V253L7-5PFI Features


FIFOs category
Frequency at most

72V253L7-5PFI Applications


There are a lot of Integrated Device Technology (IDT) 72V253L7-5PFI FIFOs Memory applications.

  • High-speed graphics pixel buffer
  • Computer networks
  • IP Camera Buffer
  • Communications
  • Multi-stage synchronizer
  • Measurement Equipment
  • Networking
  • SPI Bus Flash Memory Device
  • Telecommunication
  • Computer Systems

Write a review

Note: HTML is not translated!
    Bad           Good