72V255LA10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V255LA10PF8 Overview
You will find FIFO memory chip in the TQFP package.The package comes in a case of Tape & Reel .Mounting it Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.FIFO means contains 64 terminations.As far as the operation pins are concerned, they are 64 pins.FIFO design requires a maximum current of 55mA to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , this gadget is self-contained.There is a memory type OTHER FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.A total of 64 pins are present on the FIFO memory IC.With a frequency of 100MHz , it exhibits good accuracy.Normally, the FIFO memory's maximum value is 100MHz .The gadget can also generate a value of RETRANSMIT .
72V255LA10PF8 Features
FIFOs category
Frequency at most
72V255LA10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA10PF8 FIFOs Memory applications.
- Networking
- Extended product life cycle
- Event Recorder
- Tape controllers
- Multi-stage synchronizer
- Test Equipment
- SPI Bus Flash Memory Devices
- IP Camera Buffer
- Multimedia
- Digital buffering
