72V255LA10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V255LA10TF8 Overview
You will find FIFO memory chip in the LQFP package.Tape & Reel case is used for packaging.Surface Mount is recommended as the mounting method.A supply voltage of 3.3V is capable of producing high efficiency.In FIFO means, there are 64 terminations.In the case of the operation pins, they are 64 pins.There is a maximum current requirement of 55mA for its operation.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.It consists of a total of 64 pins.In the presence of a 100MHz frequency, it can maintain good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.Additionally, this FIFO memory can be used to generate RETRANSMIT .
72V255LA10TF8 Features
FIFOs category
Frequency at most
72V255LA10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA10TF8 FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Consumer Systems
- Industrial Systems
- Game Consoles
- Communications
- Wireless
- Character generators
- Network switching/routing
- Cardiac Monitoring Device
- Data communications
