72V255LA15PF8
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
72V255LA15PF8 Overview
FIFO memory chip can be found in the TQFP package.Mounting it in the Surface Mount way is recommended.High efficiency is possible with a supply voltage of 3.3V .In FIFO means, there are 64 terminations.There are 64 pins on the operation pins.There is a maximum current requirement of 55mA for its operation.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , this gadget is self-contained.The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.It consists of a total of 64 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .Additionally, this FIFO memory can be used to generate RETRANSMIT .
72V255LA15PF8 Features
FIFOs category
Frequency at most
72V255LA15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA15PF8 FIFOs Memory applications.
- Disk Controllers
- IP Camera Buffer
- Laser Receiver System
- Alarm System
- Code converters
- Multimedia
- Product traceability
- Thermal Management for DDR3 Memory Modules
- Temporary storage elements
- Programmable Logic Controller
