72V255LA15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V255LA15PFI8 Overview
You can find FIFO memory chip in package TQFP .It comes in a Tape & Reel package.Mounting it Surface Mount is recommended.High efficiency is possible with a supply voltage of 3.3V .The number of terminations in FIFO means is 64 .These are the 64 pins for operation.For its operation, 55mA is the maximum current required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.With a frequency of 66.7MHz , it exhibits good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V255LA15PFI8 Features
FIFOs category
Frequency at most
72V255LA15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA15PFI8 FIFOs Memory applications.
- Test Equipment
- Buses
- Product traceability
- HDD
- Communications Systems
- Signal processing
- Video time base correction
- Alarm System
- Digital buffering
- Address mapping
