72V255LA15TFI8
| Parameters | |
|---|---|
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
72V255LA15TFI8 Overview
You can find FIFO memory chip in the LQFP package.You'll find it packaged in the shape of a Tape & Reel .Mounting it Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO means contains a total of 64 terminations.These are the 64 pins for operation.Its maximum operating current is 55mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.With a frequency of 66.7MHz , it maintains good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .
72V255LA15TFI8 Features
FIFOs category
Frequency at most
72V255LA15TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA15TFI8 FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Cameras
- Signal processing
- Buses
- Test site
- Network bridges
- Programmable Logic Controller
- Switches
- PC peripheral
- SPD for DDR3 Memory Modules
