72V255LA20TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V255LA20TF8 Overview
FIFO memory chip is included in the LQFP package.In this case, it is packaged in case number Tape & Reel .It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.64 terminations are contained in FIFO means.64 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.As a result, it contains a total of 64 pins.With a frequency of 50MHz , it exhibits good accuracy.The memory logic's maximum value is 50MHz for regular operation.It is also possible to generate RETRANSMIT using this FIFO memory.
72V255LA20TF8 Features
FIFOs category
Frequency at most
72V255LA20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA20TF8 FIFOs Memory applications.
- Analog-to-digital converters
- Telecommunication
- Battery Charger
- Microprogramming
- General Data Collection Applications at Low-Temperatures
- Transistors
- Video Processing
- IP Radio
- Measurement Equipment
- SPI Bus Flash Memory Device
