72V261LA10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V261LA10PF Overview
FIFO memory chip can be found in the TQFP package.Surface Mount is recommended as the mounting method.A supply voltage of 3.3V is capable of producing high efficiency.64 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 64 pins.FIFO design requires 55mA amps of current to operate.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.As a result, it contains a total of 64 pins.When the frequency is set to 100MHz it can maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.It is also possible to generate RETRANSMIT; AUTO POWER DOWN using this FIFO memory.
72V261LA10PF Features
FIFOs category
Frequency at most
72V261LA10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA10PF FIFOs Memory applications.
- Cameras
- Routers
- Controlled baseline
- Event Recorder
- SPI Bus Flash Memory Devices
- Video time base correction
- Disk Controllers
- Battery Charger
- Computers
- Code converters
