72V261LA10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX9 |
| Standby Current-Max | 0.015A |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V261LA10PF8 Overview
This package is included in LQFP .This FIFO memory chip is packaged as a Tape & Reel .Mounting it Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.The number of terminations in FIFO means is 64 .There are 64 pins for operation.In order to operate FIFO design, a maximum current of 55mA is required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.The FIFO memory IC has a total of 64 pins.During regular operation, 100MHz is the FIFO memory's maximum value.The gadget can also generate a value of RETRANSMIT; AUTO POWER DOWN .
72V261LA10PF8 Features
FIFOs category
Frequency at most
72V261LA10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA10PF8 FIFOs Memory applications.
- Network bridges
- Product traceability
- Computers
- Seismic Data Collection at Extreme Temperatures
- Programmable Logic Controller
- Signal processing
- Temporary storage elements
- Computer networks
- Computer Systems
- Consumer Systems
