72V261LA10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V261LA10TF8 Overview
You will find FIFO memory chip in the LQFP package.In the shape of a Tape & Reel , it's packaged.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 64 terminations.64 pins are used for operation.FIFO requires a minimum of 55mA current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.There are a total of 64 pins on this board.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.This gadget can also be used to generate RETRANSMIT; AUTO POWER DOWN .
72V261LA10TF8 Features
FIFOs category
Frequency at most
72V261LA10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA10TF8 FIFOs Memory applications.
- Communications
- Controlled baseline
- Portable Information Devices
- Routers
- Wireless
- One assembly
- Analog-to-digital converters
- Multi-stage synchronizer
- Firmware loaders
- Network switching/routing
