72V261LA15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V261LA15PF8 Overview
You can find FIFO memory chip in package TQFP .It is pointing in the direction of Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.As a result of this, FIFO means contains 64 terminations.There are 64 pins for operation.In order to operate it, it requires 55mA volts of current.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.A total of 64 pins are present on the FIFO memory IC.When the frequency is set to 66.7MHz it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .Using this gadget, RETRANSMIT; AUTO POWER DOWN can also be generated.
72V261LA15PF8 Features
FIFOs category
Frequency at most
72V261LA15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA15PF8 FIFOs Memory applications.
- Multimedia
- Consumer Systems
- Desktop Computers
- IP Radio
- Buses
- Test Equipment
- Video time base correction
- Telecommunication
- Temporary storage elements
- Signal processing
