Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
64 |
Published |
2009 |
Part Status |
Active |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Frequency |
66.7MHz |
Operating Supply Voltage |
3.3V |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Element Configuration |
Dual |
Nominal Supply Current |
55mA |
Max Supply Current |
55mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Density |
144 kb |
Sync/Async |
Synchronous |
Word Size |
9b |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
Length |
10mm |
Width |
10mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72V261LA15TF Overview
The TQFP package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.As far as the operation pins are concerned, they are 64 pins.In order for FIFO design to operate, a maximum current of 55mA is required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.In the presence of a 66.7MHz frequency, it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V261LA15TF Features
Frequency at most
72V261LA15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA15TF FIFOs Memory applications.
- Optical memories
- Multi-stage synchronizer
- Magnetic memories
- Rate buffers
- TVs
- Digital buffering
- Application that requires re-writable nonvolatile parameter memory
- SPD for DDR3 Memory Modules
- SPI Bus Flash Memory Device
- Data