72V261LA20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V261LA20PF Overview
FIFO memory chip is included in the TQFP package.Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .A total of 64 terminations can be found in FIFO means.FIFO design has 64 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.Approximately 64 pins are attached to it.A frequency of 50MHz is capable of maintaining good accuracy.50MHz is the FIFO memory IC's maximum value for regular operation.It is also possible to generate RETRANSMIT; AUTO POWER DOWN by using this FIFO memory.
72V261LA20PF Features
FIFOs category
Frequency at most
72V261LA20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA20PF FIFOs Memory applications.
- Signal processing
- Test site
- Event Recorder
- Switches
- Emulators
- Portable Information Devices
- Magnetic memories
- Extended product-change notification
- SPI Bus Flash Memory Devices
- Consumer Systems
