72V261LA20TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V261LA20TF Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in the Surface Mount way is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.A total of 64 terminations are contained within FIFO means.These are the 64 pins for operation.Its maximum operating current is 55mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.In spite of the frequency 50MHz , it is capable of maintaining a good level of accuracy.Regular operation has a FIFO memory's maximum value of 50MHz .With the help of this FIFO memory, RETRANSMIT; AUTO POWER DOWN can also be generated.
72V261LA20TF Features
FIFOs category
Frequency at most
72V261LA20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA20TF FIFOs Memory applications.
- Tape controllers
- Optical memories
- Test site
- Battery Charger
- Video
- Transistors
- A/D output buffers
- Routers
- Event Recorder
- Cardiac Monitoring Device
