72V263L10PF8
| Parameters | |
|---|---|
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
72V263L10PF8 Overview
You can find FIFO memory chip in the TQFP package.Memory IC's recommended mounted way is Surface Mount .80 pins are the operation pins.For its operation, 35mA is the maximum current required.A voltage of 3.3V should be used for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.In some cases, FIFO operates at a very low supply voltage, such as 3.15V V.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72V263L10PF8 Features
Frequency at most
72V263L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V263L10PF8 FIFOs Memory applications.
- Networking
- Tape controllers
- High-speed graphics pixel buffer
- Alarm System
- Seismic Data Collection at Extreme Temperatures
- Medical Monitoring Device
- Portable Information Devices
- Multimedia
- Computers
- Network switching/routing
