72V263L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V263L15PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in Surface Mount is recommended.A supply voltage of 3.3V is capable of producing high efficiency.A total of 80 terminations can be found in FIFO means.FIFO design has 80 operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.In some cases, FIFO operates at a very low supply voltage, such as 3.15V V.The memory logic's maximum supply voltage is 3.45V volts.There are a total of 80 pins on this board.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V263L15PF8 Features
FIFOs category
Frequency at most
72V263L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V263L15PF8 FIFOs Memory applications.
- A/D output buffers
- Consumer Systems
- High-speed disk
- Portable Information Devices
- Test site
- Character generators
- Address mapping
- Test Equipment
- Network switching/routing
- Measurement Equipment
